Downstream pressure reducing regulator

Code: R1480


Type R1480 valves are high capacity spring operated pressure reducing valves of packless gland design. They will control downstream pressure within close limits and are suitable for use with oil, water, air, steam and gases or any fluid compatible with the materials of construction.

Double seat bodies are standard by balanced signal and single seat constructions are available for those applications where a lower capacity is required from a specified body size.

At extra charge all sizes above 1″” are available with composition seat for tight closure, and metal seat valves can be hand lapped to achieve leakage class III in accordance with ANSI/FCI 70-2. Actuators in five sizes are standard to cover the controlled range between 0.007 – 20 barG and can be supplied for external sensing if required.

In addition a high lift (H.L.) version is available with extended spring chamber to accommodate longer spring for extra capacity. The Type R1480 is available in the following variations:

  • Differential Control.
  • To NACE MR-01-75 (REV 93)
  • Cryogenic Service.

Specifications

BODY SIZES
Double & Balanced Seat
1, 1½”, 2″, 3″, 4″ & 6″

BODY CONNECTIONS
1″, 1½”, 2″ Screwed, all sizes flanged up to Class 600

BODY MATERIALS
Standard: Carbon steel, St/Steel, Bronze, Aluminium Bronze

TRIM MATERIALS
Stainless steel, Monel
DIAPHRAGM MATERIALS
St/Steel, Monel, Elastomer