Three way valve

Code: R30


3-Way valves are designed for flow switching or diverting service and can be used with oils, gases, steam or any fluid compatible with the materials of construction. The bodies have screwed connections and are fitted with replaceable screw-in seats. Plugs can be metal seat or fitted with ‘0’-rings to give tight closure. Two actuator types each with two actions are available to allow either port to be close by the spring in the event of air failure (see specification). The R30 can be fitted with solenoid or pneumatic control valves for remote operation and limit switches to give indication of stem position.

Specifications

BODY SIZES
½”, 3/4″, 1″
BODY CONNECTIONS
Screwed NPT or BSPT. (Bodies with weld/on flanges available
to special order).
BODY MATERIAL
Carbon Steel. (Other materials to special order).
TRIM MATERIAL
316 grade St/Steel. Plugs can be fitted with Viton @ O-rings for
tight shut off.
DIAPHRAGM
Reinforced Nitrile
OPERATING TEMPERATURE
300ºC with metal seat, 180ºC with Viton Seat.
MAXIMUM BODY RATING
300 lb.
ACTUATORS.
Type R30 DA or RA area 25 sq. inches (50 sq.ins. Available at
extra charge. Maximum pressure 2.7 BarG
Signal Connection 1/8″ or 1/4″ NPT or BSPT